Invacare LiNX-Serie Servicehandbuch

1 Before You Start
Distribution
These instructions are intended for use by experienced
service technicians only. Gaiters and associated parts are not
supplied for retail sale or installation by end users.
Warranty
This procedure is intended for the replacement of gaiters on
units not covered by warranty. Undertaking this procedure
on a product within warranty will void the warranty. All units
under warranty should be returned to an authorised Dynamic
Controls service centre for repair, refund or replacement
under warranty.
Liability
Dynamic Controls accepts no responsibility for any liability,
whether expressed or implied, resulting from use of
unauthorized parts or servicing that deviates from this
procedure.
Limitations
This procedure covers the replacement of gaiters only. If any
secondary fault, including, but not limited to, the presence
of internal contamination, is discovered during the process
of the gaiter replacement, the unit must be withdrawn from
service and either exchanged or returned to a Dynamic
Controls service centre for further analysis and where
appropriate repair.
Disclaimer
The remote modules covered under this procedure are
supplied with tamper evident warranty void seals fitted.
If a remote module is received for gaiter replacement
without the seal in an intact condition, Dynamic Controls
recommends that the unit be returned 'as is' without
DEALER: Keep this manual.
The procedures in this manual MUST be performed by a qualified technician.
Invacare® LiNX
DLX-REM050, DLX-REM060, DLX-REM1xx, DLX-REM2xx
en Joystick Gaiter
Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
de Joystick-Manschette
Servicehandbuch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
es Pieza de joystick
Manual de servicio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
fr Soufflet d'étanchéité du joystick
Manuel de maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
it Cuffia per joystick
Manuale per la manutenzione . . . . . . . . . . . . . . . . . . . . . 12
pt Fole do joystick
Manual de assistência. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
sv Joystickdamask
Servicemanual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
IenI
undertaking any service or repair. This recommendation
is intended to safeguard the healthcare professional or
service technician from the consequences of damage or
defects resulting from user tampering, whether intentional
or inadvertent. Following repairs, the technician undertaking
gaiter replacement under this procedure may choose to
apply their own tamper evident labels, to protect against
subsequent opening or tampering of the unit post-service.
ESD precautions
ESD precautions are not required for gaiter replacement in
the REM050, REM060, REM1xx and REM2xx remote modules.
2 Equipment
Parts List
Different variants of the gaiter and gaiter retainer are
available on the market, which differ from each other.
Ensure that you use the enclosed part for repair only!
Quantity Description
1
Gaiter (required)
1
DOWSIL (formerly Dow Corning) DC4 Electrical
Insulating Compound (required)
1
Gaiter retainer (optional)
DC4 electrical insulating compound can be sourced
from: Element14 / Farnell — Order Code 537019
Tools required
• 1 x TORX screwdriver bit, size T10
• 1 x torque driver capable of taking the T10 TORX
bit and reaching at least 80 cNm torque
• Cotton buds / swabs