Herunterladen Inhalt Inhalt Diese Seite drucken

Kd-55Xg81 / 55Xg80 - Sony SU-WL450 Installationsinformationen

Wandhalterung
Vorschau ausblenden Andere Handbücher für SU-WL450:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 56
2
Connect the necessary cable(s)
to the TV.
Make sure to connect the cables before
installing the TV on the wall. You will be
unable to connect the cables when the TV
is installed.
Refer to the Reference Guide supplied with
your TV.
Note
 Subcontract the cable routing in the wall to a licensed
contractor.
 Bundle the connecting cables to prevent stepping on
them before wall mounting.
3
Detach the Table-Top Stand
from the TV.
 Remove one side of the Table-Top Stand
at a time. Firmly hold the Table-Top
Stand securely with both hands while
the other people lift up the TV.
 Repeat the previous step and remove
the other side of the Table-Top Stand.
Note
 Three or more people are required to detach the
Table-Top Stand.
 Be careful not to use excessive force while detaching
the Table-Top Stand from the TV as it may cause the
TV set to fall resulting in personal injury or physical
damage to the TV.
 Take care when handling the Table-Top Stand to
prevent damage to the TV.
 Be careful when lifting the TV as the Table-Top Stand
is detached, the Table-Top Stand may topple over
and cause personal injury.
 Take care when removing the Table-Top Stand from
the TV to prevent it from falling over and damaging
the surface that the TV is sitting on.
KD-55XG81 /
55XG80
1
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
"Supplied with SU-WL450" in
"Checking the parts" on page
5.
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
 Be sure to store the used or unused parts in a safe
place for future use. Retain this manual for future
reference.
Standard mounting (2-a)
Slim mounting (2-b)
Note
 You cannot use some of the terminals on the rear of
the TV when using this mounting style.
− 11 (GB) −
Pulley 
Screw
(+PSW 6 x 20) 
Spacer (60 mm) 
Screw
Belt 
(+PSW 6 x 50) 
Pulley 
Spacer (20 mm) 
Screw
Belt 
(+PSW 6 x 20) 
GB

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis