Assembly / Disassembly; Assembling The Meat Grinder - Silvercrest SFW 350 C1 Bedienungsanleitung

Assembly / Disassembly

CAUTION - PROPERTY DAMAGE!
► All accessories are coated with a thin film of oil to protect them from corrosion.
Therefore, carefully clean all of the parts before using the appliance for the
first time, as described in detail in the chapter "Cleaning". After subsequent
usage, always apply a light coating of cooking oil to the metallic components.

Assembling the meat grinder

Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Place the transport screw
2) Place the spring
3) Then fit the cross blade
spring
correctly on the square axle.
WARNING! RISK OF INJURY!
► The cross blade
CAUTION - PROPERTY DAMAGE!
► The appliance will be damaged if the cross blade
way around!
4) Select the appropriate cutting disc
│ GB │ IE
■ 6
in the meat grinder casing
onto the transport screw
on so that the sharp side points away from the
. Ensure that the square opening in the cross blade
is very sharp! Risk of injury!
.
.
is inserted the other
/sausage disc .
is placed
SFW 350 C1