Assembly / Disassembly; Assembling The Meat Grinder - Silvercrest SFW 350 E6 Kurzanleitung

Assembly / Disassembly

CAUTION - PROPERTY DAMAGE!
► All accessories are coated with a thin film of oil to protect them from corrosion.
Therefore, carefully clean all of the parts before using the appliance for the
first time, as described in detail in the chapter "Cleaning". After subsequent
usage, always apply a light coating of cooking oil to the metallic components.
NOTICE
► Before using for the first time, remove the protective foil from the control panel.

Assembling the meat grinder

Unfold the fold-out side. There you will find the step-by-step illustrations for assem-
bling the appliance. Please note that you do not need the cross blade e and the
spring w or a cutting disc r/sausage disc u for all attachments.
1) Coat all metal parts with cooking oil.
2) Place the transport screw q in the meat grinder casing 6.
3) Place the spring w onto the transport screw q.
4) Then fit the cross blade e on so that the sharp side points away from the
spring w. Ensure that the square opening in the cross blade e is placed
correctly on the square axle.
Fig. 1
WARNING! RISK OF INJURY!
The cross blade e is very sharp! Risk of injury!
►
│ GB │ IE
■ 6
SFW 350 E6