Assembly / Disassembly; Assembling The Meat Grinder - Silvercrest SFW 350 C1 Bedienungsanleitung

Assembly / Disassembly

CAUTION - PROPERTY DAMAGE!
► All accessories are coated with a thin fi lm of oil to protect them from corrosion.
Therefore, carefully clean all of the parts before using the appliance for the
fi rst time, as described in detail in the chapter "Cleaning". After subsequent
usage, always apply a light coating of cooking oil to the metallic components.

Assembling the meat grinder

Unfold the fold-out side. There you will fi nd the step-by-step illustrations for as-
sembling the appliance.
1) Place the transport screw 6 in the meat grinder casing 5.
2) Place the spring 7 onto the transport screw 6.
3) Then fi t the cross blade 8 on so that the sharp side points away from the
spring 7. Ensure that the square opening in the cross blade 8 is placed
correctly on the square axle.
WARNING! RISK OF INJURY!
The cross blade 8 is very sharp! Risk of injury!
►
CAUTION - PROPERTY DAMAGE!
The appliance will be damaged if the cross blade 8 is inserted the other
►
way around!
4) Select the appropriate cutting disc 9/sausage disc w.
SFW 350 C1
GB
IE
CY
5