Dascom Tally T2240 Kurzanleitung Seite 19

Quick start-up
Adjust Paperway
Menu Char
TOF
Tear
A
FormAdj=12/72" *
Set Exit
Standard 1. print line
Newly set 1. print line
Press the Adjust
Online
Setup
Press the TOF
Online
Setup
B
<
Press the or
Online
You can set values from 0 to 220/72" for fanfold paper, from 0 to 72/72" for single
sheets.
Setup
12/72"
The setting made will be retained after printer power-off. For more detailed information, refer to
the online documentation on the CD-ROM, chapter 3
key.
key.
The bottom edge of the currently valid first printing line A of the
paper is transported to the tear edge B.
The factory setting for the first printing position is 12/72".
>
key to move the first printing line to the appropriate position.
Confirm the setting by pressing the
The printer returns to its initial status.
(Mechanical adjustments to the
Settings (I)
Set key.
printer).
17