Safety Instructions For Inspection And Installation Work; Transport And Interim Storage - Wilo -E series Einbau- Und Betriebsanleitung

2.5

Safety instructions for inspection and installation work

The operator must ensure that all inspection and installation
work is carried out by authorised and qualified personnel, who
are sufficiently informed from their own detailed study of the
operating instructions.
Work on the product/unit should only be carried out when it has
been brought to a standstill. It is mandatory that the procedure
described in the installation and operating instructions for
shutting down the product/unit be complied with.
2.6 Unauthorised modification and manufacture of spare parts
Modifications to the pump/system are only permitted after
consultation with the manufacturer. Original spare parts and
accessories authorised by the manufacturer ensure safety. The
use of other parts can nullify the liability from the results of
their usage.
2.7 Improper use
The operating safety of the supplied product is only guaranteed
for conventional use in accordance with Section 4 of the oper-
ating instructions. The limit values must on no account fall
under or exceed those specified in the catalogue/data sheet.

3 Transport and interim storage

Immediately check the product for any transit damage on
arrival. If damage is found, the necessary procedure involving
the forwarding agent must be taken within the specified period.
CAUTION! Risk of damage to the pump!
Danger of damage due to incorrect handling during transport
and storage.
Installation and operating instructions Wilo E.../1-5
English
6