Installation Instructions - Thermalright AXP-200 Bedienungsanleitung

Installation Instructions:

Step 1:
Step 1 : Backplate Installation
Choose the platform (775/115x/1366)you are in use. Make four M3L10 Screws go through the
Metal Back Plate from bottom towards top.And then place the Metal Back Plate on the table.
Put the four Washers (for Intel) around the Screw Cylinders.
Step 2:
Step 2 : Back Plate Cap
Note: When installing on a 775 platform, please
first insert the Back Plate Cap into the opening on
the Back Plate. Make sure you have the Cap facing
downwards. (Only for 775).
Step 4:
Step 4 : Place the Anchoring Mount on the Screw
Nuts. Use the four M3L6 Screws to fix
the Anchoring Mount on to the Screw Nuts.
3
1366
775
Step 3:
Step 3 : Place the motherboard on top of the Back
Plate. See the four Screw Cylinders go through
the four holes around the processor socket.Cap
the four Screw Cylinders with the four Screw Nuts.
Make sure the side with a washer is facing the
Back Plate.
Step 5:
Step 5 : Applying Thermal Paste
Apply the Chill Factor III to the base of the
Heatsink and the surface of the CPU evenly.
1156
1155