Before Use; Selecting The Grinding Disc; Changing Sanding Sheets; Dust / Swarf Removal By Suction - Parkside PEXS 270 A1 Bedienungs- Und Sicherheitshinweise

Before use / Commissioning / Working instructions

Before use

Q

Selecting the Grinding Disc

Q
Metal removal and Surface:
The rate of metal removal and the surface quality
are determined by the grain size of the grinding disc.
Please note that corresponding grinding discs
with different grain sizes should be used for
processing different materials.

Changing sanding sheets

Q
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
Lift the grinding disc
from the backing pad
Note: Before securing a new sanding sheet
remove all dust and dirt from the sander plate
Ensure that the openings in the sanding sheet
concur with the boreholes of the sanding plate

Dust / Swarf removal by Suction

Q
Please note the "Safety instructions" section.
removal by Suction with Dust Collector:
Push the dust collector
device.
In order to empty the dust collector
off the device.
Note: Empty the dust collector
and regularly in order to ensure the optimum
removal of dust by suction.
External Exhaust Suction (see Illustration A):
Connection:
Push the adapter for external exhaust suction
on to the exhaust nozzle
to fix it in place. If necessary, use the reducing
piece by pushing it into the adapter for
8
external exhaust suction
Push the hose of an approved suction device
(e.g. a workshop vacuum cleaner) on to the
10 GB
at the side and pull it off
5
in order to remove it.
4
completely onto the
3
pull it
3
in good time
3
and turn it clockwise
6
.
7
adapter for external exhaust suction
the reducing piece if necessary
removal:
Pull the hose of the suction device off the
adapter for external exhaust suc-tion
Turn the adapter for external exhaust suction
in an anticlockwise direction and pull it off with
the reducing piece

Commissioning

Q

Switching on and off

Q
Note! Always switch the rotary sander on before
applying it to the material to be worked, then make
contact with it.
When operating the device you can select between
, intermittent or continuous operation mode:
5
.
4
To switch on intermittent operation mode:
5
. Press the On / OFF switch
4
To switch off intermittent operation mode:
Release the On / OFF switch
Switching on continuous operation:
Press the On / OFF switch
down and press the locking button
Switching off after sustained operation:
Press the On / OFF switch

Working instructions

Q
Wait until the electric tool has stopped moving
before you put it down.
7

Grinding Surfaces

Q
Turn the electric tool on, place the entire grinding
surface on the substrate that is to be worked
on and move it with moderate pressure across
the workpiece (see Illustration B, C, D).
, using
7
.
8
.
7
if necessary.
8
.
1
.
1
, keep it pressed
1
.
2
and then release it.
1
7