Using The Snooze Function; Temperature Display; Humidity Display - Auriol Z29962A Bedienungs- Und Sicherheitshinweise

is switched off automatically after 2 minutes.
Press one of the buttons, MEMORY
12
alarm signal off within this time.
Note: the alarm rings every day at the set time.
©

Using the snooze function

Press the Z
alarm is ringing to activate the snooze function.
The alarm signal silences and the Z
flashes. The alarm signal sounds again after an
interval of 5 minutes.
Note: the alarm rings every day at the set time.
©

Temperature display

The LCD indicates both the current indoor
outdoor temperature
Press and hold the ADJUST button
3 seconds. The °C display starts to flash.
Press the ADJUST button
the °C and °F temperature scales.
Press the MEMORY button
entry.
©

Humidity display

The current humidity
The comfort indicator
three categories.
The displays have the following meaning:
WET
COMFORT
DRY
64089_aur_Wetterstation_Content_LB7.indd 19
, ALARM or CLOCK
13
Z
/ REGISTER button
.
7
is displayed on the LCD.
3
divides the humidity into
2
= humidity
= humidity
= humidity
11 , ADJUST
, to switch the
14
10 when the
Z display
5 and
for approx.
12
to switch between
12
11 to confirm your
> 70 %
3
40 – 70 %,
3
< 40 %
3
GB/CY 19
03.03.11 10:56