Intended Purpose; Enclosed Parts; Notes On Safety; Symbols Used In The Instructions - FLORABEST FHE 550 Bedienungs- Und Sicherheitshinweise

GB

Intended purpose

The high pruning saw is intended for pruning
work on tree branches.
It is not designed for extensive sawing work,
tree felling and cutting materials such as ma-
sonry, plastic or food.
The device is designed for use by adults.
Young people over 16 years old may use the
high pruning saw under supervision only.
It is essential to ensure that you are standing
in a safe position, in order to prevent acci-
dents.
The equipment is not intended for use by peo-
ple of restricted physical, sensory or mental
ability. This is also fundamentally applicable
for children.
The manufacturer is not liable for damages,
which were caused through use in
applications for which it was not designed, or
incorrect operation.
The high pruning saw is designed for
employment in the do-it-yourselfer sector. It
was not designed for continuous employment
in the commercial sector.

Enclosed parts:

- High pruning saw
- Chain bar
- Saw chain
- Blade cover
- Shoulder strap
- Round handle
- 60 ml Grizzly-Bio-Oil

Notes on safety

This section deals with the basic safety
regulations while working with the high
pruning saw.
An high pruning saw is a dangerous
device, which can cause serious or
even fatal injuries with incorrect or
careless use. Thus, for your own safe-
ty and the safety of others, you should
always take note of the instructions on
6
safety and, in case of difficulties, con-
sult a specialist for advice.

Symbols used in the instructions

Hazard symbols with information on
prevention of personal injury and
property damage.
Precaution symbol (explanation of pre-
caution instead of exclamation mark)
with information on prevention of harm
/ damage.
Notice symbol with information on how
to handle the device properly.

Symbols used on the saw

Make yourself familiar with all control
elements before any work. Practice
handling the saw and have explained
the functions, operating methods and
sawing techniques by a practiced user
or specialist.
Read and take note of the operating
manual belonging to the machine!
Wear personal protective equipment.
Basically, wear protective goggles or,
even better, face protection, ear pro-
tection, safety helmet, cut-protection
working clothes, cut-protection gloves,
and cut-protection safety boots with
anti-slip soles.
Beware of falling objects.
Keep the equipment away from nearby
people.
Do not expose the machine to the rain.
Do not allow the equipment to become
damp or operate it in a damp environ-
ment.