Operating And Monitoring - Siemens SIPART DR21 Kurzanleitung

Operating and Monitoring

Controls and
displays on
front panel
Display actual 1
and setpoint
2
values 3
4
5
6
Modify manip- 7
ulated value 8
9
10 Signal lamps for Δy digital outputs on S controller
11 Manual/automatic switchover pushbutton and
12 Signal lamp -- manual mode
13 Signal lamp -- y external mode
Modify set- 14 Pushbutton: reduce setpoint
point value 15 Pushbutton: increase setpoint
16 Switchover pushbutton -- internal/external setpoint and
17 Internal setpoint signal lamp
18 Computer ready switched off with (w
Other signals 19 Adaptation in progress signal lamp
20 "Limit value violated" signal lamp
21 Tagging label
NOTE
.
Operation can be disabled using the digital signal bLb; excep-
tion: switchover for w/x digital indicator.
34
1
2
21
3
4
5
6
7
Analog indicator -- actual value x
Analog indicator -- setpoint w
w/x digital indicator (other values can be displayed)
w signal lamp -- lights up when w is being displayed
x signal lamp -- lights up when x is being displayed
Switchover pushbutton for w/x digital indicator,
pushbutton to acknowledge flashing following restoration
of power and pushbutton for accessing selection level
Pushbutton to modify manipul. variable -- close (open)
Pushbutton to modify manipul. variable -- close (close)
y digital indicator
"Enter" pushbutton to move from selection level to
configuring level
"Exit" pushbutton to return from configuring and
selection levels to the process control level
2
18
17
16
19
20
15
14
12
13
11
10
9
8
) signal lamp
ext
SIPART DR21
C73000-B7474-C141-07