Drivers For Components And Operating Systems; Installation Of Software - Siemens SIMATIC IPC647E Produktinformation

The PCIe expansion card should be used as a plant bus as follows:
• SIMATIC IPC647E (Type 1), CP1623: Slot 2 or 3 (pre-installed with IE bundle)
• SIMATIC IPC647E (Type 2), CP1623: Slot 1 (pre-installed with IE bundle)
• SIMATIC IPC847E, CP1623: Slot 10 (pre-installed with IE bundle)
• SIMATIC IPC647E (Type 1), redundant CP1623: Additional slot 3
• SIMATIC IPC647E (Type 1), additional BCE NIC: Additional slot 3
• SIMATIC IPC647E (Type 2), redundant CP1623: Additional slot 4
• SIMATIC IPC647E (Type 2), additional BCE NIC: Additional slot 4
• SIMATIC IPC847E, redundant CP1623: Additional slot 11
• SIMATIC IPC847E, additional BCE NIC: Additional slot 11
If not already occupied by multi-monitor graphics card or hardware RAID controller
1)
Slot for multi-monitor graphics card You can expand your device with a multi-monitor graphics card. Use the following slots
for this.
• SIMATIC IPC647E (Type 1): Slot 3
• SIMATIC IPC647E (Type 2): Slot 3
• SIMATIC IPC847E: Slot 6
Slot for hardware RAID controller (only with Windows Server) If your device is equipped with a hardware RAID controller, it is
installed in one of the following slots:
• SIMATIC IPC647E (Type 1): Slot 2
• SIMATIC IPC647E (Type 2): Slot 2
• SIMATIC IPC847E: Slot 9
If it has not been allocated to another module, a slot next to a hardware RAID controller (see the following list) is equipped
with a perforated cover for better ventilation.
• SIMATIC IPC647E (Type 1): Slot 3
• SIMATIC IPC647E (Type 2): Slot 3
• SIMATIC IPC847E: Slot 8

Drivers for components and operating systems

The drivers for components are stored in the "C:\Windows\ConfigSetRoot\Drivers" folder of the restored system or on the
Restore USB stick in the "Drivers" folder.
Note
If your system is equipped with a hardware RAID controller, a "Graphical User Interface" (GUI) is installed for it during
commissioning.
The pre-installed Internet Explorer 11 is not suitable for using the GUI.
You need to download and install a current web browser, such as MS Edge.

Installation of software

Use the "A1 image" for the installation of software and an associated functional change of the device (see "Scope of delivery
of the software (Page 18)").
In this way, you avoid unwanted dependencies, for example, license messages from software components that are no longer
used in the "A2 image".
24
1)
1)
1)
SIMATIC IPC647E/847E
A5E51584613-AA , 01/2022