Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Drivers for components and operating systems
The drivers for components are stored in the "C:\Windows\ConfigSetRoot\Drivers" folder of the restored system or on the
Restore USB stick in the "Drivers" folder.
Installation of software
Use the "A1 image" for the installation of software and an associated functional change of the device (see "Scope of delivery
of the software (Page 15)").
Image files for data backup
Use the SIMATIC IPC Image & Partition Creator V3.5.4 or higher to create image files for data backup.
Please make sure that your PC has the newest BIOS version before you use the SIMATIC IPC Image & Partition Creator.
Operation with the SIMATIC Management Agent
In order to integrate the IPC bundles into the plant managed with the SIMATIC Management Console, you can install or
activate the SMA (SIMATIC Management Agent) during the initial commissioning or system restore.
You can choose whether or not to use the SMA in this dialog:
Initial situation
Use
A1 Image (Windows operating system only)
Yes
The SMA corresponding to the PCS 7 version is
installed and the associated SIMATIC Management
Agent service is activated. After this, manage the
computer by means of the SIMATIC Management
Console.
No
-
You can also install the SMA manually via the Restore USB stick "Additional_Products\SMA" or activate it in the operating
system later on.
Additional information is available in the manual Process Control System PCS 7; SIMATIC Management Console.
20
A2 Image (incl. PCS 7 software), if included in the
scope of delivery
The "SIMATIC Management Agent" service is
activated. After this, manage the computer by means
of the SIMATIC Management Console.
The SMA remains on the computer with the
associated service SIMATIC Management Agent
disabled (this behavior matches that of the manual
PCS 7 installation).
SIMATIC IPC627D/677D
A5E50920299-AA, 05/2021
Werbung
Inhaltsverzeichnis
