Beyerdynamic Xelento wireless Bedienungsanleitung Seite 13

Xelento wireless – In-Ear Headphones
Firmware and Updates
Please note that the following descriptions refer to the
standard settings as supplied with firmware version 1.0.
It is possible that a newer firmware version is available.
Pairing with the player
Before you use the Xelento wireless for the first time, you
have to pair it with your mobile phone or another device
with Bluetooth
various players. Please refer to the appropriate manual
of the player.
• When the Xelento wireless is
turned off, press the multi-
function button
seconds
®
Bluetooth mode (the LED
the remote control will slowly
flash blue and red in turns).
• Activate
function on your player and, if
necessary, search for new devices.
• Select "beyerdynamic Xelento wireless" under the
available devices in the Bluetooth
and pair both devices. When in range, both devices are
paired automatically each time you turn them on.
Alternatively, you can pair the Xelento wireless with an
NFC-enabled player via NFC. Please note that the Xelento
wireless must be turned on.
• Activate the NFC function in your player so that all
necessary information can be transferred to the player
and pairing can be established.
• Hold the player closely over the rear of the remote
control of the Xelento wireless.
• Now both devices will automatically be paired.
Pairing and clearing the list of players
If there are already several players in the list of your
Xelento wireless and your Xelento wireless cannot be
paired with another new player, the list is full and should
®
. The pairing process may be different with
for 6
to start
the Bluetooth
the
of
®
®
menu of your player
13