Scope Of Delivery - Cosmo CPB Einbau- Und Betriebsanleitung

English

5 Scope of delivery

• Pump
• Insulation shell
• Non-return valve
(Type COSMO CPBA)
• Sealing rings (Type COSMO CPBA)
• 1.5 m- cable
• Installation- and operating instructions
6 Installation
DANGER! Electrocution!
Before starting work, disconnect pump from power supply.
1. Provide a weatherproof, frost-free, dust-free and well-
ventilated room for the installation.
2. Choose an installation site that is easily accessible.
CAUTION! Dirt can cause the pump to fail. Flush pipework
before installation.
INFO! Use the pump motor with the included pump housing
only. The pump motor does not fit to other pump housings in
the market.
NOTE! As to the COSMO CPBA version, stop valve and
non-return valve are within the delivery scope and have to be
mounted and sealed with a tightening torque of 15 Nm
(hand-tight, Fig. 2).
As to the COSMO CPB version, stop valve and non-return
valve (opening pressure max. 0.16 kPa) have to be installed in
addition.
CAUTION! Screwing with excessive tightening torque
destroys the valve screw connections and the O-rings. When
installing the valves, use a fixed spanner to prevent twisting!
3. Mount the pump motor to the pump housing.
14


and stop valve

with Euro plug
