Operation - Cameo AURO SPOT Z 300 Bedienungsanleitung

8
8
BACKLIT LC DISPLAY
Displays the currently activated operating mode, the options menu, and other system information. The display automatically switches to the
main screen after approx. one minute of inactivity.
9 CONTROL KEYS
MODE
You can access the options menu by pressing MODE. Pressing it again will return you to the main screen. If you press the MODE button
without having first pressed ENTER to confirm a value or status change, the previously confirmed value or status shall be restored.
AND ARROW KEYS
Select the individual menu options in the options menu (DMX address, operating mode, etc.) and in the sub-menus.
ENTER
Pressing ENTER will take you to the menu level where you can change values and access one of the submenus. You can also confirm value
adjustments by pressing ENTER.
AND ARROW KEYS
Allows you to change the value of a menu option, such as the DMX address, as desired.
BATTERY-POWERED DISPLAY
The battery-powered display allows you to change settings even when the device is not connected to a power supply. Press and hold MODE
for approx. 4 seconds to do so. The spotlight's DMX unit will not activate in this case. This means that the display will show that there is no
DMX signal present, even if a DMX signal is present in the DMX input.

OPERATION

NOTE
When the spotlight is correctly connected to the power, the following message is displayed during the boot process and the motor reset
process: "Software Update Please Wait..." (only for service purposes) and the Cameo logo appears in the display. The spotlight is ready after
this process, and the operating mode that was previously selected will activate.
MAIN SCREEN DMX MODE
The DMX mode (DMX 17CH, 20CH) is shown in the display's top row, and the DMX start address is clearly displayed in the middle. As soon
as the DMX signal is interrupted, the display's background color changes to red and "No DMX" is shown. If the DMX signal is restored, the
display returns to the main screen. The display can also be rotated 180° by pressing the
6
9
key.