Cameo AURO SPOT Z 300 Bedienungsanleitung Seite 7

MAIN SCREEN STAND-ALONE MODE
"Operating Mode" is shown in the display's top row, and the stand-alone operating mode (e.g. Static User Macro 1) is clearly displayed in
the middle. The display can also be rotated 180° by pressing the
SETTING THE DMX START ADDRESS (DMX Address)
You can access the options menu (System Settings) by pressing MODE. Using the
menu option (dark background) and confirm with ENTER. The three digits indicating the DMX start address will change red. You can then
use the and arrow keys to select the desired DMX start address (hold down the arrow keys to quickly change the value). Confirm the
process with ENTER and press MODE to return to the main screen.
SETTING THE OPERATING MODE (Mode)
You can access the options menu (System Settings) by pressing MODE. Using the
(dark background) and confirm with ENTER. The symbols indicating the operating mode (e.g. DMX 20CH) will change red. You can then use
the and keys to select the desired operating mode. Confirm the process with ENTER and press MODE (repeatedly, if necessary) to
return to the main screen.
Operating modes: DMX 17CH, DMX 20CH, Slave, Auto, Static.
DMX OPERATING MODE (DMX)
Two different DMX operating modes are available: 17-channel and 20-channel (DMX 17CH, 20CH). The DMX operating modes can be
selected as previously described in the section "SETTING THE OPERATING MODE". DMX tables and channel assignments can be found in
these instructions under the section "DMX CONTROL".
key.
and arrow keys, now select the "DMX Address"
and arrow keys, now select the "Mode" menu option
7