Panasonic AK-HC1500G Bedienungsanleitung Seite 56

Setting of menu items
 SETTING menu
[3] GEN-LOCK
[4] PIX DEFECT
GEN-LOCK INPUT [BNC, DSUB]
For selecting whether the sync signals are to
be input from the BNC or D-SUB connector.
H PHASE-COARSE
[–40 to +40 (720 mode)]
[–60 to +60 (1080 mode)]
For roughly adjusting the horizontal phase.
H PHASE-FINE [–45 to +45]
For finely adjusting the horizontal phase.
SD  HD PHASE CRS [–4 to +4]
For roughly adjusting the phase of the HD
video signals when SD sync signals have been
input.
SD  HD PHASE FINE [–99 to +99]
For finely adjusting the phase of the HD video
signals when SD sync signals have been input.
AUTO DETECTION
When ACTIVE is selected, automatic defect
compensation processing* is performed, and
when this processing is completed, the status
returns to READY.
* Execute automatic defect compensation
processing after supplying the power to the
camera at the normal temperature for at least
two hours.
- 55 (E) -