Technical data
Standards and operating conditions
EMC data
Standards and operating conditions
Conformities/approvals
Conformity
CE
EAC
RoHS
Approval
UL
Protection of persons and device protection
Degree of protection
IP20
Type 1
Open type
Insulation resistance
Overvoltage category III
Overvoltage category II
Isolation of control circuits
Safe mains isolation via double/reinforced
insulation
Protective measures against
Short circuit
Earth fault
Overvoltage
Leakage current
> 3.5 mA AC, > 10 mA DC
EMC data
Noise emission
Category C2
Noise immunity
Fulfills requirements according to
62
2014/35/EU
Low-Voltage Directive
2014/30/EU
EMC Directive (reference: CE-typical drive system)
TR CU 004/2011
Eurasian conformity: safety of low voltage equipment
Eurasian conformity: electromagnetic compatibility of technical
TR CU 020/2011
means
Restrictions on the use of certain hazardous substances in
2011/65/EU
electrical and electronic devices
for USA and Canada (requirements of the CSA 22.2 No. 274)
UL 61800-5-1
File No. E132659
Data applies for operationally ready mounted state and not in wire
EN 60529
range of terminals
UL 50
Protection against accidental contact only
UL 61800-5-1
Only in UL-approved systems
EN 61800-5-1
0 ... 2000 m amsl
EN 61800-5-1
over 2000 m amsl
EN 61800-5-1
Earth-fault protected depending on operating status
EN 61800-5-1
Please observe regulations and safety instructions!
EN 61800-3
EN 61800-3