Vitek VT-4209 BW Betriebsanweisung Seite 11

Symbols «ЕЕE» on the display, accompanied by
repeated sound signals
Symbols «HHH» on the display, accompanied by
repeated sound signals
Smoke from the ventilation openings
The baked bread dropped, the bottom part of
the bread is damp
The bread has stuck to the walls of the baking
form
The bread structure is not homogeneous or the
bread went wrong
Delivery set
Multi-cooker bread-maker – 1 pc.
Deep-fry basket – 1 pc.
Baking form – 1 pc.
Hook for removing the paddle - 1 pc.
Kneading paddle – 1 pc.
Tongs for the bowl – 1 pc.
Bowl – 1pc.
Bowl lid – 1 pc.
Bread-maker measuring cup - 1 pc.
Multi-cooker measuring cup - 1 pc.
Measuring spoon – 1 pc.
Soup ladle – 1 pc.
Spatula – 1 pc.
Basket for steam cooking – 1 pc.
Cottage cheese bag – 1 pc.
VT-4209_A4_NEV.indd 11
Temperature sensor breaking
Temperature sensor is not working because of short
circuit
Ingredients got onto the heating element
The bread has stayed in the bread maker for too long
after baking
The bottom part of the bread has stuck to the
kneading paddle
Wrong mode is selected
Frequent opening of the lid during the operation
process
A long power cutoff during the operation process
The paddles movement is blocked
Technical specifications
Power supply: 220-240 V ~ 50/60Hz
Maximum rated input power in multi-cooker mode 900 W
Maximum rated input power in bread-maker mode 800 W
Combined power: 1700 W, 230 V
The manufacturer preserves the right to change the specifications of the unit
without a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be obtained from the dealer from whom
the appliance was purchased. The bill of sale or receipt must be produced when
making any claim under the terms of this guarantee.
11
Switch the unit off and contact the authorized service
center
Switch the unit off and contact the authorized service
center
Switch the unit off by unplugging the power cord from the
mains socket. Take the form out, let the unit cool down.
Wipe the walls of the process chamber and the heating
element with a wet cloth.
When making bread according to this recipe switch the unit
off right after the bread is ready
Grease the paddles with oil before assembly
View the available baking programs, select another
program by pressing the «MENU» button repeatedly
Open the lid only upon the request of the program in order
to add supplementary ingredients.
Load all necessary ingredients again and start the baking
process from the very beginning
Take the form out and check if the drive is rotating. In case
of any defect contact the authorized service center
This product conforms to the EMC-Requirements as laid down by the Council Directive
2004/108/ЕС and to the Low Voltage Regulation (2006/95/ЕС)
ENGLISH
18.11.2013 9:42:54