Rear Brake Aerolight Mechanical Version - look 795 RS Montageanleitung

The rear brake is fitted at works in accordance with the manufacturer's instructions.
N.B. : The sheaths supplied should be used for the front brake, in the same way as for the
rear brake. The use of any other type of sheath (in particular aluminium bead or double-coa-
ted "more rigid" sheaths) is not advisable.
Assembly :
1 / Pass the rear brake sheath (through the marked side) through entry ② (Fig. 2) in order to
brake the rear wheel with the right lever (EU) or through entry ③ (Fig. 2) in order to brake with
the left lever (UK).
IMPORTANT : be sure that the brake sheath remains above the derailleur gear in entry ②
or ③ (Fig. 2).
2 / Position the brake sheath 170mm from the end (Fig. 27). Keep some slack The sheath must
not be taught inside the frame.

Rear brake AEROLIGHT mechanical version

EN
39