Important Information; Product Presentation; Pre-Assembly Check - look 795 RS Montageanleitung

IMPORTANT INFORMATION

When fitting your E-POST 2 EVO seatpost,
the AEROSTEM stem, the ZED 3 crankset
and the ADH 2 handlebar, please refer to the
relevant product instructions.
www.lookcycle.com section SERVICES >
MOUNTING INSTRUCTION > 795 AEROLIGHT
- LIGHT
PLEASE NOTE : LOOK products are
!
designed and optimised for use by cyclists
weighing no more than 100 kg (220.5 lbs).
WARNING RE COUNTERFEIT PRODUCTS :
!
The use of counterfeit products is
highly dangerous and cause you and third
parties to have bad falls causing serious,
and even fatal injuries.
For further information, please go to the
WARRANTY POLICY > COUNTERFEITING
section of our website, www.lookcycle.
com.
For further information on the IMPORTANT
INFORMATION to be complied with,
please see the WARRANTY POLICY >
IMPORTANT INFORMATION section of
our website, www.lookcycle.com.
If you are unable to go to our website, you
can obtain a paper copy of our guarantee
policies from your dealer.

PRODUCT PRESENTATION

Your 795 RS has been developed and
designed to the specifications of the LOOK
design office and will provide the best
transmission of effort and unrivalled steering
precision.
These two characteristics are possible
thanks to the incorporation of components
specifically designed for this frame. This
means that they are fully compatible with
each other, thus giving the whole assembly
greater coherence for a better performance.
So, in other words, the 795 RS is the first in the
world to incorporate several innovations: the
AEROSTEM inclinable stem, the ZED 3 100%
carbon monoblock crankset, (with integrated
brake calliper on the AEROLIGHT model), as
well as the E-POST 2 EVO seatpost.

PRE-ASSEMBLY CHECK

Your frame is delivered with :
• Fork and factory pre-set HEAD FIT 5
headset assembly.
• Pre-routing for electrical equipment in
white tubing.
• On the AEROLIGHT model: front brake on
the fork and rear brake on the frame.
• Frame kit.
EN
25