Operation; Switching The Amplifier On; Using The Control Buttons; Reset To Default Settings - Omnitronic CIA-40WIFI Bedienungsanleitung

8 Operation

8.1 Switching the amplifier on

The CIA-40WIFI will be switched on as soon as it is connected to the power supply. It will automatically go to
the operating mode most recently selected, which will be indicated by the LEDs (1). If the amplifier was
connected to a WiFi network before, it will automatically try to re-establish the connection. The STATUS
indicator will flash rapidly during this process; it will light continuously once the connection has been
established.
Description of the status indicators:
Indicator
STATUS
AUX

8.2 Using the control buttons

The amplifier can be operated using the control buttons (2-4), the 4STREAM app or any other AirPlay or
DLNA player on a computer, smartphone or tablet.
How to use the control buttons:
Button
⁄
⁄
MODE
Preset 1-6

8.3 Reset to default settings

Press the multi-function button for approx. 10 seconds while the amplifier is powered on. Then all current
settings of the unit will be deleted and replaced by the factory settings. The amplifier will restart after the
reset. The reset can also be started via a web browser in the device settings under System > Restore
Factory Settings ( chapter 6.1).
Function
will flash slowly when there is no WiFi connection
will flash rapidly when the connection is being established
will light continuously when a WiFi connection exists
audio streaming via WiFi
AUX input is used as audio source
playback via the USB port
Function
Pause/continue playback
Next/previous title
Increase/decrease volume
Selects the audio source. The corresponding status indicator lights up.
These buttons are defined by software. Within the 4STREAM app they can
be used for direct access to internet radio stations. To assign button, tap the
symbol after the name of the radio station. The streaming internet
addresses will be stored in the CIA-40WIFI and can then be called up
independently of the app via the appropriate buttons on the amplifier
( chapter 7.2).
22 • EN