Mounting Or Removing Of Arm Supports - Vermeiren Eclips+ AD Gebrauchsanweisung

EN
2.6

Mounting or removing of arm supports

"
!
CAUTION:
bottom side of the arm support.
The arm supports of the wheelchair can be mounted by following instructions.
1. Mount the rear tube of the arm rest in tube hood
2. Make sure the arm support is mounted very well.
3. Fold the arm rest forward.
4. Pull the lever
5. Click the front tube of the arm rest % in tube hood
A
To open and remove the arm rest:
1. Pull lever
2. Fold the arm rest backwards.
To remove the arm rest, pull the rear of the arm support from tube hood $.
3.
To apply the brakes:
1.
distinctive click.
!
To release the brakes:
1.
2.
3.
Risk of clamping ! Keep fingers, buckles and clothes away from the
"# $#
on tube hood
"
and pull the front of the arm rest ! upwards.
Push the brake handles ! forward till you feel a
"
Risk of unintended movement !
CAUTION:
Make sure the wheelchair is on a flat
horizontal surface before releasing the
brakes. Never release both brakes
simultaneously.
Release one brake by pulling the handle !
backwards.
Hold the hand-rim of the release wheel with
your hand.
Release the second brake by pulling the handle
backwards.
!
.
(Fig A)
upwards.
(Fig B)
$
.
(Fig B)
!"#$%-%
Eclips+ AD
2011-03
(Fig C)
(Fig D)
B