Components; Accessories; Location Identification Plate; Explanation Of Symbols - Vermeiren Eclips+ AD Gebrauchsanweisung

The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
ISO 7176-16: Resistance to ignition of upholstered parts
ISO 7176-19: Wheeled mobility devices for use as seats in motor vehicles.
1.3

Components

1.4

Accessories

The following accessories are available for the Eclips+ AD:
Anterior pelvic belt (B58) for mounting on the tubes of the back
Anti-tipping device (B78) for mounting on the bottom frame
Drum brakes for the attendant (B74) for mounting on the push handles
1.5

Location identification plate

1.6

Explanation of symbols

Maximum mass
Indoor and outdoor use
Down slope
Up slope
CE conformity
1 = Cross
2 = Handles
3 = Back
4 = Arm pads
5 = Arm supports
6 = Driving wheels (rear wheels)
7 = Hand rims
8 = Brakes
9 = Tip cap
10 = Steering wheels (Front wheels)
11 = Footrests
12 = Seat
1 = Vermeiren name
2 = Taxi hooks
3 = Identification plate
4 = Name Eclips+ AD
!"#$%*%
EN
Eclips+ AD
2011-03