Programming Colour Transition Period; Programming Colours - Sentiotec WAVE.COM4 SOUND&LIGHT Bedienungsanleitung

OPERATING INSTRUCTIONS
4.3.2

PROGRAMMING COLOUR TRANSITION PERIOD

This is the time the LED control takes on change of colour (manual or at the end of the interval
period), for the colour drift from the current to the next colour.
1. On the control element with the MODE
2. Press
(NB: do not change the colour number in the process!)
3. Pressing the
4. The current colour transition time in seconds and the symbols
5. With the
of colour the occurs with this programmed time.
6. By pressing the

4.3.3 PROGRAMMING COLOURS

The coloured lamp mixes the desired chroma from the 3 LED-base colours (Red-Green-Blue).
This mix can be programmed. This gives the customer the option of programming his personal
colours behind the colour numbers.
Range of the individual components of the colour is always 0 to 20 (5%steps)
9. On the operating element with the MODE
10. Press
(NB: do not change the colour number in the process!)
11. The programmed RED – portion of the chroma flashes in the display.
12. Changeable with
simultaneously for approx. 3 sec
key twice takes you into the setting menu.
keys, the colour transition period is extended or shortened. Each change
key once, confirm the input and thus leave the programming.
together and simultaneously for approx. 3 sec
and with the MODE key
key, go into "Automatic colour" mode.
key, go into "Manual" mode.
confirm the input
34/44
and flash.