OPERATING INSTRUCTIONS
4.0.0 OPERATING INSTRUCTIONS FOR THE END USER
4.1.0 GENERAL SAFETY NOTICES
Please be aware that the components in the housing of the coloured lamp are operated with
dangerous mains voltage
Do not connect or disconnect any live components! Always isolate the mains connection
beforehand using the appropriate circuit breaker in the building's distribution system.
Electrical switch-off must be completed in all poles in line with the relevant regulations of the
local Electricity Boards.
Electrical work should only be carried out by a qualified expert. Any interventions by
unauthorised persons shall render the warranty null and void. There is also a risk of serious
electric shocks of live parts are touched.
Keep the controls away from heat sources.
Before start-up, check that all connections are properly connected and that no cables or
parts are damaged
30/44