Introduction; Intended Use; Features; Package Contents - Parkside PAT 20-Li A1 Originalbetriebsanleitung

CORDLESS NAILER/STAPLER
PAT 20-Li A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is intended for stapling cardboard,
insulating material, leather, material (textiles or
natural fibre) and comparable materials onto
hardwoods, softwoods, chipboard or plywood-like
material in private households. The appliance is
only for use in dry rooms. Any other uses of or
modification to the appliance is deemed to be
improper and carries the risk of serious personal
injury. The manufacturer accepts no responsibility
for any damage attributable to misuse.
This appliance is not intended for commercial use.

Features

Trigger
Button for the LED work light
Release button for the battery pack
Battery pack
Battery display LED
Battery charge level button
Magazine slider
Release
Magazine shaft
Scale
Fill level indicator (wire staples)
Tacker nose
Face plate
LED work light
Impact force control
High-speed charger
Red charge control LED
Green charge control LED
│ GB │ MT
■ 14

Package contents

1 cordless nailer/stapler
1 high-speed battery charger
1 battery pack
500 staples 20 mm
500 nails 20 mm
1 carrying case
1 set of operating instructions

Technical data

Cordless nailer/stapler:
Rated voltage:
Operations:
Magazine shaft capacity:
Battery pack: PAP 20 A1
Type:
Rated voltage:
Capacity:
Cells:
Charger: PLG 20 A1
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
Wire staples:
Staple width:
Type 55
15–25 mm
Staple length:
Type 47
15, 20, 25,
32 mm
Nail length:
PAT 20-Li A1
(DC)
20 V
up to 30 impacts/min
50 pcs
LITHIUM ION
(DC)
20 V
2.0 Ah
5
230–240 V ~ , 50 Hz
(AC)
65 W
T3.15A
3.15 A
(DC)
21.5 V
2.4 A
approx. 60 min
II / (double insulation)
6 mm
15–25 mm
15, 20, 25, 32 mm
PAT 20-Li A1