Hints On Disposal; Declaration Of Conformity - Klarstein 10010176 Handbuch

Problem
The beer flows too
slowly out of the
dispensing tap.
The cooling chamber
is covered with frost.
The dispenser lid does
not close.
It is very difficult to push
the connecting tube (26)
into the beer keg.
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
27
Cause
The CO2 cartridge is empty.
There is too little CO2 in the beer keg.
The dispensing tap handle was not
opened completely.
The surrounding environment is too
humid.
The surrounding temperature is too low. Place the dispenser in a warmer environ-
The dispensing unit (3) is not correctly
mounted onto the beer keg.
The connecting tube (26) is too dry.

Hints on Disposal

Declaration of Conformity

Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
Remedy
Inserting a new CO2 cartridge into the
dispenser.
Turn the CO2 regulator (5) towards I or II.
Completely open the dispensing
tap handle.
Place the dispenser in a drier environment.
ment.
Correctly mount the dispensing
unit (3).
Wet the connecting tube (26) with cold
water.