Cleaning; Storing The Device When Not In Use; Troubleshooting; The Milk Frother Is Not Working - Silvercrest SMAS 3 A1 Bedienungsanleitung Und Sicherheitshinweise

9. Cleaning

WARNING of damage to property
Do not use any scratching or abrasive cleaning agents or abrasive objects (such as a
metal scourer) for cleaning purposes. Otherwise the milk frother may be damaged.
Do not clean the milk frother and its accessories in the dishwasher, as this may cause
irreparable damage.
Never immerse the handle (3) in water or any other liquid. No liquid may enter the
handle (3).
Ideally, cleaning is carried out directly after use. This way, any milk residues cannot dry.

Pull off the protective cover (6).

Clean the housing of the milk frother with a soft, damp cloth, using a mild detergent for
stubborn stains.

Place the whisk (5) in rinse water to clean. Press down on the on/off button (1) for a few
seconds so that the whisk (5) rotates. Take the whisk (5) out of the rinse water as soon as it has
come to a standstill. Rinse the whisk (5) with clear water.

Dry all of the parts thoroughly.

Place the protective cover (6) on the device.

10. Storing the device when not in use

If the milk frother is not going to be used for a longer period of time, store it in a safe, clean and dry
place.

Remove the batteries.

Before storing the device, clean it thoroughly as described in the previous section.

11. Troubleshooting

If your milk frother does not work as usual, use the following instructions to try and solve the
problem. If working through the following tips does not eliminate the fault, please contact our
hotline (see the 'Warranty information' section).

11.1. The milk frother is not working


The batteries are dead. Please replace the batteries with new ones of the same type. Please
refer to the instructions in the 'Changing the batteries' section.

The batteries were inserted incorrectly. Please refer to the instructions in the 'Changing the
batteries' section.
SilverCrest SMAS 3 A1
English - 25