Nvme Ssd Components - Hewlett Packard Enterprise ProLiant BL460c Gen9 Server Blade Bedienungsanleitung

NVMe SSD components

Item Component
Release lever
1
Activity ring LED
2
Do Not Remove
3
LED
Power LED
4
Power button
5
Do Not Remove
6
button
Upon NVMe SSD insertion, an LED initiation sequence will be visible - lighting each LED in the carrier in sequence from left to
right. The sequence will cycle until the drive is recognized by the system. When the SSD is recognized by the system - the Do Not
Remove LED will be solid white and the Power LED will be solid green.
Status Definition
Ejects the NVMe drive carrier from the cage.
—
Rotating green Drive activity
Off No drive activity
Solid white Drive is powered on, and configured in system.
Do not remove the drive.
Flashing white Ejection request pending. Do not remove the drive.
Off Drive removed from the PCIe bus, and can be ejected.
Solid green Drive is powered on, and configured in system.
Do not remove the drive.
Flashing green Ejection request pending. Do not remove the drive.
Drive removed from the PCIe bus, and can be ejected.
Off
Momentary press to request drive removal from PCIe bus
—
and ejection. Drive removal request can be denied by
operating system.
Releases the release lever for removal and insertion.
—
Component identification 10