Inhaltsverzeichnis
Werbung
o
Remove the storage controller/NVMe pass-through board (on page 22).
o
Remove the direct connect SATA cable (on page 19).
If installed, remove the internal USB drive. To locate the internal USB connector, see "System board
6.
components (on page 11)."
Remove the DIMM baffle
7.
Remove the front panel/drive cage assembly (on page 24).
8.
Locate the TPM connector
9.
CAUTION: Any attempt to remove an installed TPM from the system board breaks or
disfigures the TPM security rivet. Upon locating a broken or disfigured rivet on an installed
TPM, administrators should consider the system compromised and take appropriate measures
to ensure the integrity of the system data.
Install the TPM board. Press down on the connector to seat the board
10.
on page 11).
Install the TPM security rivet by pressing the rivet firmly into the system board.
11.
Install the front panel/drive cage assembly (on page 23).
12.
Install the DIMM baffle
13.
Do one of the following:
14.
("Remove the DIMM
baffles" on page 16).
("System board
components" on page 11).
("Install the DIMM
baffles" on page 17).
("System board
components"
Hardware options installation 51
Werbung
Inhaltsverzeichnis
