Inhaltsverzeichnis
Werbung
Position
S5
S6
S7
S8
S9
S10
S11
S12
You can access the redundant ROM by setting S1, S5, and S6 to On.
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS, NVRAM, or both deletes configuration information. Be sure to
configure the server blade properly to prevent data loss.
Mezzanine connector definitions
Item
Mezzanine connector 1
Mezzanine connector 2*
*When installing a mezzanine option on mezzanine connector 2, processor 2 must be installed.
DIMM slot locations
DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP modes use
the alpha assignments for population order, and the slot numbers designate the DIMM slot ID for spare
replacement.
Default
Function
Off
Off = Power-on password is
enabled.
On = Power-on password is
disabled.
Off
Off = No function.
On = ROM reads system
configuration as invalid.
Off
Off = Set default boot mode to
UEFI.
On = Set default boot mode to
legacy.
—
Reserved
Off
Off = BL460
On = WS460
—
Reserved
—
Reserved
—
Reserved
PCIe
x16, Type A mezzanine card only
x16, Type A or B mezzanine card
Component identification 12
Werbung
Inhaltsverzeichnis
