Parkside PSSA 4 A1 Originalbetriebsanleitung Seite 23

Iikely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
h) Keep handles and grip surfaces
dry, clean and free from oil and
grease. Slippery handles and grip
surfaces do not permit safe operation
and control over the power tool in
unexpected situations.
5) CAREFUL HANDLING AND USE
OF BATTERY DEVICES
a) Charge the batteries only in
chargers that are recommended
by the manufacturer. Risk of fire if a
charger that is suitable for a specific type
of battery is used with other batteries.
b) In the power tools, use only the
batteries designed for the pur-
pose. The use of other batteries may
result in injuries and risk of fire.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could
cause bridging of the contacts.
A short circuit between the battery con-
tacts may cause burns or fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water. If the liquid gets into
eyes, seek medical assistance.
Leaking battery fluid may cause skin
irritations or burns.
e) Do not use damaged or altered
batteries. Damaged or altered
batteries can be unpredictable and
lead to fire, explosion or risk of injury.
f) Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures over 130oC can cause
an explosion.
g) Follow all instructions for
charging and never charge the
battery or the battery-powered
tool outside the temperature
range stated in the operating
instructions. Incorrect charging
or charging outside the permitted
temperature range may destroy the
battery and increase the risk of fire.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person
using only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged
batteries. All battery repairs should
be carried out by the manufacturer or
authorised customer service centres
only.
7) SPECIFIC SAFETY INSTRUCTIONS
FOR POWER SCREWDRIVERS:
a) Hold the appliance by the in-
sulated handle grips when
performing work in which the
screw may come into contact
with hidden wiring or its own
power cord. If the screw were to
come into contact with a live electrical
cable, metal parts of the appliance
could also become live and cause an
electric shock.
GB IE
23