Herunterladen Inhalt Inhalt Diese Seite drucken

Charging Process; Charging The Battery; Initial Operation; Switching On And Off - Parkside PSSA 4 A1 Originalbetriebsanleitung

Akku-stabschrauber
Vorschau ausblenden Andere Handbücher für PSSA 4 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
must be replaced by the
manufacturer, a customer
service agent of the same
or a similarly qualifi ed
person in order to prevent
hazards.

Charging process

Do not expose the battery to
extreme conditions such as
heat and impact. There is a
risk of injury from leaking
electrolyte solution! In case
of contact, rinse with water
or neutraliser and consult a
doctor if contact has occurred
with eyes etc.
Charge the battery only in
dry areas.
There is a risk of injury from
electric shock.
The device may only be powered with
SELV (Safety Extra Low Voltage) as
marked on the device.
Before initial use, charge the battery
installed in the equipment. Do not
charge the battery for several short pe-
riods in succession.
To charge the integrated Li-ion battery
of the device, preferably use the
battery charger supplied.
In all cases, observe the applicable
safety information as well as the regu-
lations and directions for environmen-
tal protection.
Defects resulting from improper han-
dling are not subject to the guarantee.

Charging the battery

1. Connect the charging cable con-
nector (12) with the charging
socket (7) of the device.
Insert the USB plug (
of the charging cable into the
charger (
2. Plug the charger (
electrical outlet.
3. The battery indicator (3) lights up:
red => Start of charging
red and yellow =>
Battery appr. half charged
red-yellow-green =>
Battery fully charged.
4. After the charging process,
disconnect the charger (
from the mains supply.

Initial Operation

Wearing hearing protection reduces
the risk of hearing damage.

Switching ON and OFF

1. Press the on/off switch (8) to start
the device. The LED work light
(10) lights up during operation.
2. To turn it off, release the on/off
switch (8).
Overload protection: The safety cut-off of
the device switches off in case of overload.
Release the On/Off switch, the device can
be switched on again after a few seconds.
Checking the charge status
of the rechargeable battery
The battery indicator (
state of charge of the battery.
GB
IE
16)
13)
13) into an
13)
3) signalises the
25

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis