Use - Silvercrest SIKP 2000 E2 Bedienungsanleitung

The hob
Tempera-
ture levels
in °C

Use

NOTE
► Please note that a tone sounds every time you make an entry.
1) Place the cooking pot with contents in the middle of the hob
CAUTION – PROPERTY DAMAGE!
► The weight of the pan including contents may not be more than 10 kg, as
the hob
2) Insert the plug into the mains power socket. All indicator lamps illuminate
briefly. "L" is shown on the display
than 60 °C.
NOTE
► If cooking has already taken place and the hob
above 60 °C, the display shows
3) Press the "on/off" button
and the indicator lamp "P"
NOTES
You may select between cooking with power levels or cooking with tempera-
ture settings:
► When you are cooking in the temperature mode, the appliance heats the
cooking pot to the set temperature. If the temperature falls below the set
temperature, the appliance heats up again. The temperature is thus main-
tained at the desired level.
► By adjusting the "power level", the cooking pot is heated at varying
speeds. The higher the selected power level, the faster the cooking pot is
heated.
► If you do not place a suitable cooking pot on the hob
onds or if you make some settings, the appliance will switch itself off and
emit a signal tone.
4) Press the "+"
shown on the display
■ 28
GB│IE
│
is provided with 10 temperature levels:
60 80 100 120 140 160 180 200 220 240
might be damaged otherwise.
or "-" buttons repeatedly until the required power stage is
. The MODE indicator lamp
if the temperature of the hob
still has a temperature
"- H -".
. The display shows the power level "0"
lights up.
.
is less
within 60 sec-
lights up.
SIKP 2000 E2