Image Settings - Reely Green Racer FPV Bedienungsanleitung

f) Image settings
After the camera image has been received by the goggles, you can set the image quality and the language of the
control menu.
Proceed as follows:
Briefly press the button for the setup menu or channel
search (see Figure 22, no. 10). The display will show the
brightness value and a corresponding bar chart (1).
You can use the button for frequency band switching (see
Figure 22, no. 9) to decrease the current setting. You can
use the button to switch channels (see Figure 22, no. 3) to
increase the current setting.
To go to the next menu item and save the previously made
setting, press the button for the setup menu or channel
search again (see Figure 22, no. 10).
Figure 25
The following menu items are available:
• Brightness: 0 - 100
• Contrast: 0 - 100
• Colour saturation: 0 - 100
• Language selection: Various languages
• Format switching: 16:9 or 4:3
• Reset: Resetting factory settings
If no button is pressed within approx. 5 seconds to make a menu selection, the OSD menu will disappear.
74