Reely Green Racer FPV Bedienungsanleitung Seite 63

Bob trimming:
If you want the quadrocopter to drift forwards (see dark arrow in Figure 13), repeatedly press the lower trim button for
the bob function (see also Figure 1, no. 6).
If you want the quadrocopter to drift backwards, press the upper trim button for the bob function (see light arrows in
Figure 13).
The trim setting is not saved in the transmitter. After switching the transmitter off and on, the trim is reset to
the average value.
Warning!
If big adjustments have to be made to the trim, the position sensors require calibration. The procedure for
this is described in the following section.
Figure 13
63