Fpv Mode; A) General Information; B) Preparing The Fpv Goggles - Reely Green Racer FPV Bedienungsanleitung

20. FPV mode

a) General information

By default, the quadrocopter is equipped with a front camera that transmits a video signal to the supplied FPV goggles
via the 5.8 GHz radio signal. The live broadcast makes a so-called "FPV operation" (FPV = first person view) possible.
Warning!
Pure FPV operation increases the risk of accidents because you may not see obstacles or may not see
them in time due to the restricted camera image. As a general rule, when using FPV mode, the vehicle must
be monitored by a co-pilot who can warn you about potential hazards. It therefore requires a lot of practice
to fly in FPV operation. During the learning phase in particular, ensure that the selected flight area is free
of obstacles and far away from people, animals, buildings and roads.
To ensure the interference-free transmission of video signals, there should be no other transmitters in the model's
5.8 GHz transmission range.
Important!
Before the first FPV flight, check the radio range and the quality of the video signal.

b) Preparing the FPV goggles

The FPV goggles (see Figure 21, no. 1) come with two receiving antennas (see Figure 21, no. 2) and a head strap
(see Figure 21, no. 3). Hang the straps of the head strap into the holders of the goggles (see Figure 21, no. 4). Then
screw the two receiving antennas into the antenna sockets.
Warning!
Do not overtighten the antenna union nuts, they need to be easily loosened later for the transport of the
goggles. A practical transport bag is included for safe storage of the goggles.
70
Figure 21