Operation; Making A Call; Receiving Calls; Adjusting The Receiver Volume - switel T5 Bedienungsanleitung

4

Operation

4.1

Making a call

Your telephone can be used like any conventional telephone.
Please follow the instructions:
Lift the receiver and wait until you hear the dialling tone.
Now dial the required telephone number.
To end the call, replace the receiver on the rest.
Note: The keys on the number pad will be partially illuminated
when you lift the receiver.
4.2

Receiving calls

When a call comes through, you will hear the ringing tone. The
call can now be accepted using the receiver.
4.3

Adjusting the receiver volume

If the receiver volume is too quiet or too loud for you, you can
change this to suit your requirements.
You can adjust the volume from soft
VOL. slide switch on the receiver.
4.4

Redial facility

If a connection that you have dialled is engaged or you were
unable to get through to anybody, simply replace the receiver.
The last number dialled remains stored in the telephone
automatically. To use the redial facility, proceed as follows:
Lift the receiver and press the redial button
redial number will now be dialled.
4.5

Adjustable ring tone

By means of the slide switch
choose the settings
of the ringing tone to your requirements. If at any time you do
not want to be disturbed, use the
- Operation -
(loud) or
to loud
. The stored
on the receiver you can
(soft) to match the volume
setting (off).
using the
25