Delivery Scope C 5010/C 5012 - IKA C 5010 Betriebsanleitung

Pressure tests and service tasks on the decomposition vessel must only be
performed by persons with professional training.
We recommend that the decomposition vessel be sent into our
factory for inspection and repairs if necessary after either 1000
experiments or after one year or, depending on the application,
even sooner than this.
Definition of person with professional training
A person with professional training as defined in these operating instruc-
tions is someone:
1. whose training, knowledge and experience gained through practical
activities ensures that that person will perform the tests in a proper
manner.
2. who is sufficiently reliable.
3. who is not subject to any instructions in terms of testing activity.
4. who is equipped with suitable testing equipment if necessary.
5. who can provide suitable proof demonstrating compliance with the
requirements listed in 1.
Operating pressure containers:
National regulations and laws for operating pressure containers
must be observed!
Anyone who operates a pressure container must maintain it in proper
condition, must monitor it and perform necessary maintenance
and repair tasks without delay, and must take measures appropriate
for the circumstances to ensure safety.
A pressure container must not be operated if it exhibits defects
that could endanger those working with it or third parties.
You can obtain a copy of the pressure vessel regulation from Carl Hey-
mann Press or Beuth Press.
Use only original spare parts from IKA
1 x decomposition vessel
1 x ignition wire
1 x O-Ring-Set
1 x C710.4 cotton threat
1 x gripp
1 x set of labels
1 x C 4 combustion crucible
2 x AF 5,5 double open ended wrench
1 x emergency-vent knob
1 x operating instructions
only C 5012:
1 x snap ring
1 x pressure spring
!
®
Delivery scope C 5010/ C 5012
19