Fastening Cotton Thread; Closing The Decomposition Vessel - IKA C 5010 Betriebsanleitung

Fastening cotton thread

The decomposition vessel is
equipped with a fixed ignition
wire.
A cotton thread has to be fastened
to the ignition wire in order to
carry out combustion.
Cotton thread

Closing the decomposition vessel

• Place the cover onto the lower section and push down until it presses
against the stop piece in the lower section.
C 5010
Cotton thread
Fasten cotton thread as shown in
the diagram.
Note: Beware the danger of burn-off
in the case of incorrectly laid ignition
wires!
C 5012
C 5010
• Place the union nut onto the lower section and tighten by hand.
C 5010
• The decomposition vessel can now be fi lled.
C 5012
C 5012
21