5 Nm
4
5
6
20
GB
3.3 Assembling the running rail
►
Slide components into track in the follow-
ing order: 1× in rail buffer, 2× roller car-
riage, 2× in rail buffer, 2× roller carriage,
1× in rail buffer. Position the hold open
Position the hold open
Position the hold open
springs on the end at which latching is
required.
Observe direction of buffers.
►
Slide in rail buffer to the desired end stop
position and tighten to 5 Nm.
If fitting within a wall recess, fit running rail
3.4 Fitting the door leaves
►
Engage door leaves in mounting bolt and
firmly tighten lock nut.
Adjust leaf height by turning suspension
bolt clockwise or anticlockwise before
tightening lock nut.
3.5 Final assembly of door leaves
►
Screw-fit an additional door buffer half
way up the door leaf.
►
Clip on the end cap (optional).