Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5 Nm
4
5
6
10
GB
1.3 Assembling the track
►
Slide two roller carriages into the track.
►
Slide in an in rail buffer with hold open
spring and an in rail buffer without hold
open spring, ensuring that the buffer with
hold open spring is at the correct rail end.
►
Slide in rail buffer to the desired end stop
position and tighten to 5 Nm.
If fitting within a wall recess:
Fit running rail components before mount-
ing the rail.
1.4 Fitting the door leaves
►
Engage door leaves in mounting bolt.
Firmly tighten lock nut.
Adjust leaf height by turning the suspen-
sion bolt clockwise or anticlockwise before
tightening the lock nut.
1.5 Final assembly of door leaves
►
Screw-fit an additional door buffer half
way up the door leaf.
►
Clip on the end cap (optional).
Werbung
Kapitel
Inhaltsverzeichnis
