GEZE Perlan KS series Montageanleitung Seite 79

3.1 Installing the track
► Screw-fit mounting brackets/ceiling
mounts to track. When wall-mounting, any
unevenness of the wall of up to ±3 mm
can be compensated by moving the
bracket within the slot.
No mounting brackets/ceiling mounts are
required for direct mounting.
Mount the rail at every second hole.
If the clip-on trim panel is used, fit clips
and spacers as described in section "Fit-
ting the clip-on trim panel".
► Install the track to wall or ceiling, making
sure that the track is mounted horizontally.
Observe distances in attachment B.
For wall mounting and leaf thicknesses
above 30 mm, fit running rail and fixing
bracket with spacers.
3.2 Preassembling the door leaf
► Using screws, fit support plates to the
upper end face of the door at intervals of
60 mm from the edge and centred on the
leaf thickness.
Two support plates per door leaf. The
open end of the slot must face the wall.
Wall mounting
any any
fit clips fit clips
1
2
The The
3
Ceiling mounting
19
GB