5 Nm
4
5
6
14
GB
2.3 Assembling the running rail
►
Slide two roller carriages into the track.
►
Slide two in rail buffers into the track.
Observe direction of buffers.
►
Slide in rail buffer to the desired end stop
position and tighten to 5 Nm.
►
Slide deflection pulley into the track.
Do not secure the deflection pulley.
►
At the opposite rail end, slide motor into
the track and secure.
2.4 Fitting the door leaves
►
Engage door leaves in mounting bolt.
Firmly tighten lock nut.
Adjust leaf height by turning the suspen-
sion bolt clockwise or anticlockwise before
tightening the lock nut.