Holzmann BT 1220 Bedienungsanleitung Seite 8

CHECK YOUR MACHINE BEFORE OPERATION
Check the machine and its safety devices for any damages. Check all nuts,
bolts etc ... if they are tightened securely. Check the condition of the wor-
king tools. Check the function of the ON/OFF switch on a regular basis.
BEWARE OF WOODDUST
Especially chemically treated but as well coated wood materials may produ-
ce toxic wood dust during operation, that may cause permanent respiratory
damages. If working with treated wood, wear an appropriate breathing mask
and work in a well ventilated area!
We recommend to connect your machine to a dust collection system.
ELECTRIC HAZARD
Do not touch any electric parts of the machine. Assure yourself to operate
the machine only with an appropriate supply circuit. It shall be grounded
and equipped with a short-circuit protector. The Electric specifications must
match with the required specifications of the machine (V / Hz / Phases).
OPERATION INSTRUCTIONS
GENERAL RULES
Before starting the machine, check that there are no more tools like wren-
ches etc... on the sanding belt, the sanding table.
Check that all fixing bolts and levers are tightened securely!
Check your workpiece for any foreign material like nails etc.
WORK PIECE FEED
Support workpiece with backstop or work table.
Hold the work firmly, so that it may not be driven from your hands.
Feed workpiece against rotation of sander.
SANDING BELT / DISC
Maintain 1/16 inch (~ 2mm) maximum clearance between table and sanding
belt or disc.
In operation, do not press on the belt. Excessive pressure against the belt is
never necessary. It will only result in damage to the belt or work piece.