Technical Information - Holzmann BT 1220 Bedienungsanleitung

Belt change
You should check the status of the V-belt every 3
months. If they are worn, replace it immediately.
In order to gain acces to the belt you need to open
the disc cover as shown in Figure J.
Then, you need to dismount the sanding plate as
shown in Figure L.
If necessary, change the belt, and mount the san-
ding disc and disc cover back afterwards.

TECHNICAL INFORMATION

Technical Data
Table Size 310 x 190mm
Disc Size 228mm Ø
Belt Size 1220 x 150mm
Belt Table TiltA 90°
Sanding Table Tilt 45°
sanding belt speed 5.5m/sec
Motor power S1 0,75PS 230V
Net Weight 49kg
Wiring Diagram
Warranty
Holzmann Maschinen grants 1 year of full spare
part warranty onto this product.
For eventual warranty issues please save your
sales receipt and hand them in to your HOLZMANN
reseller.
Warranty exclusions:
>> wearing parts in general
>> Any damages caused by unappropriate
handling, operation, electric connection or
by insufficient maintenance.
Spare Parts
Use only original spare parts! For spare part orders
please make a copy of the spare part drawing indi-
cating the required spare part number(s).
Your HOLZMANN reseller will hand in your spare
part inquiry to us.
www.holzmann-maschinen.at