Technical Data - Makita DCS231T Originalbetriebsanleitung

Technical data

Stroke volume
Bore
Stroke
Max. power at speed
Max. torque at speed
Idling speed / max. engine speed with bar and chain
Coupling speed
Sound pressure level at the workplace L
1)
22868
Sound power level L
WA, Fl+Ra
Uncertainty for noise
Vibration acceleration a
- Tubular handle
- Rear handle
Uncertainty for vibration
Carburetor (diaphragm carburetor)
Ignition system
Spark plug
Electrode gap
Fuel consumption at max. load per ISO 7293
Specific consumption at max. load per ISO 7293
Fuel tank capacity
Chain oil tank capacity
Mix ratio (fuel/two-stroke oil)
Chain brake
Chain speed (at racing speed)
Sprocket pitch
Number of teeth
Pitch / Driving element strength
Guide bar, length of a cut
Weight (fuel tank empty, without chain and guide bar)
1) Figures derived in equal part from idle, full-load, and top-speed operation.
2) Figures derived in equal part from full-load and racing speed.
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The declared vibration emission value has been measured in accordance with the standard test method and may be
used for comparing one tool with another.
• The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power tool can differ from the declared emission value depending on
the ways in which the tool is used.
• Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
per ISO
pA av
2)
per ISO 22868
1)
per ISO 22867
h,w av
3
cm 22.2
mm 33
mm 26
-1
kW/min 0.74/8,000
-1
Nm/min 0.97/6,500
3,000/11,500 (DCS230T),
-1
min 3,000/10,500 (DCS231T),
3,000/10,000 (DCS232T)
-1
min 4,500
dB (A) 95.0
dB (A) 105.8
dB (A) K: 2.5
2
m/s 6.0
2
m/s 5.0
2
m/s K: 2.0
Type Walbo WYL
Type electronic
Type NGK CMR 6A
mm 0.6 - 0.7
kg/h 0.41
g/kWh 561
3
cm 200
3
cm 190
25:1
Actuation manually or by kickback
m/s 20.4 (91PX, 91VG) 18.0 (25AP)
inch 3/8 (91PX, 91VG) 1/4 (25AP)
Z 6 (91PX, 91VG) 8 (25AP)
3/8 /0.050 (91PX, 91VG)
inch
1/4 /0.050 (25AP)
cm 25
kg 2.5
19